HiRes P51D-15-NA Mustang "Little Duckfoot" s/n 44-14660
-------------------------------------------------------------------------------

History of "Little Duckfoot" and it's pilot Lt.Gerald Tyler:

P51D-15-NA "C5-J" of the 357nd. Fighter Group, Leiston AAF Station 373, England (Circa: Feb.1945)
"Little Duckfoot" was the second Mustang flown by Lt.Gerald Tyler. A member of the 364th. Fighter Squadron.
Typical of all natural metal Mustangs recieved by the 357th. Fighter Group at this time
Lt.Tyler's P51D was field painted RAF Green in anticipation of being transferred
to a forward landing ground airfield in Europe which was cancelled however 'Little Duckfoot'
retained her Camo paint scheme till the end of hostilities.
'Little Duckfoot' shows the final seven kills of Lt.Tyler's final score.
Three of which were scored against German Fighters on September 18.1944
while supporting the Allied airbourne invasion of Holland.
Other historic missions that Lt. Greald Tyler took part in were
'Operation Chattanooga Choo Choo' Spring 1944 over France prior to D-Day,
'Operation Overlord' as top cover for the D-Day invasion of Normany 
'Operation Frantic' stuttle missions to the USSR in the summer of 1944 
and providing top cover support of the ill-conceived 'Operation Market Garden'
in the Netherlands in the fall of that same year 1944. 
--------------------------------------------------------------------------------

General Historical notes of the 357th.FG and Mustang "Little Duckfoot" s/n 44-14660:

The 6-50cal.gunned Mustangs with the new 'K-14' Gyroscopic sights began arriving at frontline squadrons
in late June 1944. Lt.Tyler recieved his P51D in the fall of that year which he continued to fly
until the end of operations in May of 1945.
Initailly the 357th. was stationed at Raydon AF and was serving with the 9th.USAAF
until they were transferred the the 8th.USAAF and station at their permanent home base of Leiston.
The 357th.FG was the first unit within the 8th.Fighter Command to adopt the SD110 squadron codes, 
ie: letter/numeral combination. Another irregularity that set the 357th.FG apart from it's sister units
was the absence of the 'Invasion Strips' to the top pain of the main wings.
Contrary to the 8th.FC's directive, these top 'Strips' were never applied 
and the single white UK/QIM strip remained. Just how this came to pass is uncertain today.
However, it is highly likely that such a course of action was an arbitary decision at Group level.
For which, it would appear, that the 357th.FG recieved an exemption from the 8th.Fighter Command. 
---------------------------------------------------------------------------------

Skinner's Notes:

This skin was developed from B&W photo plate profile found in
squadron/signal publication's 357th Fighter Group by James Roeder
Historical notes were compiled from;
'357th Fighter Group' by James Roeder
'Battle Colours' - Insignia and Aircraft Markings of the Eighth Air Force
in World War II by Robert A.Watkins

Skin created for Emil's ETO 42-45 Campaign by David"Skylark"Phillips

---------------------------------------------------------------------------------
Modder's Notes: 

This skin folder contains a batch file, for converting tpc to pcx 
for those who want to try their hand at skinning. Simply place this file and the accompaning file, 
gpmTpc2Pcx.exe, in your folder containing the tpc files and execute. 
This batch file is courtesy of John "Chompy" Masters who also created the 3d model. Much thanks to you John!


USE.
Simply extract all the files into your EAW folder, or install into your skin manager program 
as it's instructions reccomend. To uninstall, just delete the files listed below.

The new High res 3dz set for the P-51 B is based on the same 3dz's from the P-51 D, 
with a few changes to get the look right.
1.  Wide view armour added
2.  "Deflection" type gunsight/instrument panel
3.  High res wingview added.

The new 'Damaged Torn Off Wings' (TOW) and 'roughly torn off' wing stub have been added 
to the aircraft to give more realistic looking damgage FX. 

(Note: Due to time constraints, I have not updated the pcx files to match these damage pcx files 
created by Chompy. If you wish them to match the current scheme, the pcx files are made available for your use.)

The only changes to the main file set (when compared to the D's files) 
are the inclusion of separate TOW damage PCX's.  
The Complete file list and their uses are as follows-

PP51bA.3dz = 3dz file for the Left rear fuselage and tail
Pp51bB.3dz = 3dz file for the Right rear fuselage and tail.
Pp51bC.3dz = 3dz file for the Cockpit area.
Pp51bE.3dz = 3dz file for the Right wing.
Pp51bF.3dz = 3dz file for the Front fuselage, left and right
Pp51bG.3dz = 3dz file for the Left wing.
Pp51bH.3dz = 3dz file for the Gunst type transparent shadow.
Pp51bL.3dz = 3dz file for the Left Torn Off Wing (TOW).
Pp51bM.3dz = 3dz file for the Medium Distance Model (MDM).
Pp51bP.3dz = 3dz file for the Propellor.
Pp51bR.3dz = 3dz file for the Right Torn Off Wing (TOW).
Pp51bS.3dz = 3dz file for the Long Distance Model (LDM).
Pp51bU.3dz = 3dz file for the High res Wingview.
Pp51bV.3dz = 3dz file for the Cockpit - left side.
Pp51bW.3dz = 3dz file for the Cockpit - right side.
Pp51bY.3dz = 3dz file for the in cockpit view of the prop.
Pp51bZ.3dz = 3dz file for the Gunsight and seat.

Pp51bFRT.pcx = file for the FRonT fuselage L and R (F.3dz)
Pp51bLEX.pcx = file for the Left wing (G.3dz)
Pp51bLTW.pcx = file for the Left Torn off Wing (L.3dz)
Pp51bMEX.pcx = file for the MDM and LDM (M and S.3dz)
Pp51bREX.pcx = file for the Right wing (E.3dz)
Pp51bRTW.pcx = file for the Right Torn off Wing (R.3dz)
Pp51bTEX.pcx = file for the cockpit, shadow, prop and cockpit prop (C,H,P and Y.3dz's)
Pp51bTLL.pcx = file for the TaiL Left and rear fuselage (A.3dz)
Pp51bTLR.pcx = file for the Tail Right and rear fuselage (B.3dz)
Pp51bTRA.pcx = transparency file for the TEX file
Pp51bV.pcx   = file for the cockpit (V and W.3dz's)
Pp51bVTR.pcx = Transparency file for the cockpit (clear glass gunsight mod)
Pp51bWNG.pcx = file for the High res wingview (U.3dz)
Pp51bX.pcx   = file for the cockpit guages (X.3dz) 

The X.3dz (guages) is not included.  It's the only file I haven't altered!!

As always, there are still a few rendering issues that I have been unable to solve.  
This 3dz is optimized for D3D, but if there is demand, I can work on a separate Glide 3dz.

Thanks to All who helped with the original P-51D HR model, 
Salty for the great textures which make up the base skin and the MEX, for the aircraft/pilot info 
at the top of the page, and for great construction and skinning detail help. 
Mr J for his Malcolm hood version of the D (the C.3dz uses this) and for his transparency ideas on non-TEX files,
JWC for the wide view armour idea,
Peregrine for the Deflection gunsight idea.
Migge for the cockpit and guage textures
Sorry, thanks and S! to anyone I forgot.

---------------------------------------------------------------------------------
Note: Skinner's Remarks
Although my part of this project was to create the skin of "U've Had It!".
I was able to use the original pcx. files from Jeff"Salty"Salter's 
Sandbagger Host Site
      
http://eawhostsite.0catch.com/salty.html        

"U've Had It!" would not have been possible if it weren't for the brilliant creative efforts of; 
John "Chompy" Masters for creating the original HiRes P-51D model....
Jeff"Salty"Salter for the great textures which make up the base skin and the MEX file.... 
JWC for the wide view armour idea....
Peregrine for the Adjusted Reticules K-14 gunsight....
Migge for the cockpit and guage textures....
Working Flaps were created by Ray'Rotton'Otton....

My thanks to them all....

__________________________
Fly her well....and enjoy

Cheers mates
David"Skylark"Phillips


